Clarion DXZ466MP, Руководство пользователя

Страница: 13 / 31

13
English
DXZ466MP
Adjusting the volume
1. Press the front part of the [ ROTARY
] knob. The
knob will pop up.
2. Turning the [ ROTARY
] knob clockwise
increases the volume; turning it counter-
clockwise decreases the volume.
∗
The volume level is from 0 (minimum) to 33
(maximum).
Audio mode adjustments
1. Press the [ A-M
] button to select the adjustment
mode. The mode switches as follows each time
the [ A-M
] button is pressed:
BASS TREBLE BALANCE FADER
Previous mode
2. Turning the [ ROTARY
] knob to adjust the se-
lected audio mode.
BASS (Bass) :
Adjustment range : -6 to +7
TREBLE (Treble) :
Adjustment range : -6 to +6
BALANCE (Balance) :
Adjustment range : L13 to R13
FADER (Fader) :
Adjustment range : F12 to R12
∗
The display returns to the previous mode 7
seconds after the adjustment.
Basic Operations
Adjusting the treble
1. Press the [ A-M
] button and select “
TREBLE
0 ”.
2. Turning the [ ROTARY
] knob clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗
The factory default setting is “ 0 ”.
(Adjustment range: -6 to +6)
Adjusting the bass
1. Press the [ A-M
] button and select “
BASS 0 ”.
2. Turning the [ ROTARY
] knob clockwise em-
phasizes the bass; turning it counterclockwise
attenuates the bass.
∗
The factory default setting is “ 0 ”.
(Adjustment range: -6 to +7)
Adjusting the balance
1. Press the [ A-M
] button and select “
BALANCE
0
”.
2. Turning the [ ROTARY
] knob clockwise empha-
sizes the sound from the right speaker; turning
it counterclockwise emphasizes the sound from
the left speaker.
∗
The factory default setting is “
0
”.
(Adjustment range: L13 to R13)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [ A-M
] button and select “
FADER 0 ”.
2. Turning the [ ROTARY
] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗
The factory default setting is “ 0 ”.
(Adjustment range: F12 to R12)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
∗
The factory default setting is “
Z-ENHANCER
OFF ”.
Each time you press the [ Z
] button, the tone effect
changes in the following order:
“
OFF ” “ BASS BOOST ” “ IMPACT ”
“ EXCITE ” “ OFF ” ...
• BASS BOOST : bass emphasized
• IMPACT
: bass and treble emphasized
• EXCITE : bass and treble emphasized
mid de-emphasized
• OFF : no sound effect