Clarion DB188RMP Скачать руководство пользователя страница 4

Страница: 4 / 18

EXPLANATION OF IC

Main section

052-1955-00

LC8783J2PA-59H6-E

Main System Controller

Terminal Description
pin 1 : DBGP0

: O : Not in use.

pin 2 : DBGP1

: O : Not in use.

pin 3 : DBGP2

: O : Not in use.

pin 4 : B/U_DET

: IN : Backup detection signal input.

pin 5 : ACC_DET

: IN : ACC detection signal input.

pin 6 : REMCON

: IN : Remote controller signal input terminal.

pin 7 : RDS_CLK

: IN : RDS clock pulse input.

pin 8 : RES

: IN : Reset signal input.

pin 9 : XT1

: IN : 32.768kHz crystal input, sub clock

pin 10 : XT2

: O : 32.768kHz crystal output, sub clock

pin 11 : VSS

: - : Connect to GND.

pin 12 : CF1

: IN : 13.5MHz crystal input, main clock

pin 13 : CF2

: O : 13.5MHz crystal output, main clock

pin 14 : VDD

: - : Positive supply voltage, connect to 5V

pin 15 : N.C

: O : Not in use.

pin 16 : N.C

: O : Not in use.

pin 17 : N.C

: IN : Not in use.

pin 18 : S-METER

: IN : RDS S-METER signal input.

pin 19 : NOISE

: IN : RDS noise signal input.

pin 20 : KEY_A/D

: IN : Input terminal of A/D converter for key judgement.

pin 21 : AMP_MUTE

: O : Muting signal output to internal audio power

amplifier.

pin 22 : N.C

: IN : Connect to GND.

pin 23 : N.C

: IN : Connect to GND.

pin 24 : MODEL_INT3 : IN : The destination setting input.
pin 25 : TEXT PORT

: O : For CD text pin, Hi=OK, Lo=NG.

pin 26 : CD_DI

: O : Connect to LC786920 DI pin.

pin 27 : CD_DO

: IN : Connect to LC786920 DO pin.

pin 28 : CD_CLK

: - : Connect to LC786920 CLK pin.

pin 29 : CD_CE

: O : The chip enable signal output to LC786920.

pin 30 : CD_MUTE

: IN : Connect to LC786920 CD_MUTE pin.

pin 31 : CD_RST

: O : Connect to LC786920 REST pin.

pin 32 : IF_REQ

: O : The tuner pack IF buffer control signal output.

pin 33 : SUB_RDY

: IN : Connect to USB_READY pin.

pin 34 : REG_RDY

: IN : Connect to REG_READY pin.

pin 35 : CD_INSW1

: IN : Connect to CD MECHA SW1.

pin 36 : CD_INSW2

: IN : Connect to CD MECHA SW2.

pin 37 : CD_DMUTE

: O : Connect to CD driver IC MUTE pin.

pin 38 : CD_S/L

: O : Connect to CD driver IC VIN-SW pin.

pin 39 : VSS

: - : Connect to GND.

pin 40 : VDD

: - : Positive supply voltage, connect to 5V.

pin 41 : CD_ERROR

: IN : Connect to CD_ERROR pin.

pin 42 : CD_LIMIT_SW: IN : Inside limit switch signal input.
pin 43 : CD_EM

: O : CD eject signal output for CD dirver IC.

CD_LM="L", CD_EM="H"

pin 44 : CD_LM

: O : CD loading signal output for CD dirver IC.

CD_LM="H", CD_EM="L"

pin 45 :

RDS NOISE_DCHG

: O : RDS noise discharge signal output.

pin 46 : RDS_MUTE

: O : RDS mute signal output.

pin 47 : SYS_MUTE

: O : System mute signal output.

pin 48 : N.C

: O : Not in use.

pin 49 : LCD_DI

: O : Connect to LCD driver IC DI pin

pin 50 : LCD_DO

: IN : Connect to LCD driver IC DO pin

pin 51 : LCD_CLK

: - : The clock pulse output to the LCD dirver IC.

pin 52 : LCD_CE

: O : The chip enable signal output to the LCD dirver

IC.

pin 53 : EVOL_DATA : I/O: The serial data output to the volume IC.
pin 54 : EVOL_CLK

: O : Clock pulse output to the volume IC.

pin 55 : VDD

: - : Positive supply voltage, connect to 5V.

pin 56 : VSS

: - : Connect to GND.

pin 57 : INT_1

: IN : The destination setting input.

pin 58 : INT_2

: IN : The destination setting input.

pin 59 : VER_1

: IN : Pefrence vlotage input for A/D converter.

pin 60 : VER_2

: IN : Pefrence vlotage input for A/D converter.

pin 61 : N.C

: IN : Connect to GND.

pin 62 : N.C

: IN : Connect to GND.

pin 63 : N.C

: IN : Connect to GND.

pin 64 : N.C

: IN : Connect to GND.

pin 65 : N.C

: IN : Not in use.

pin 66 : N.C

: O : Not in use.

pin 67 : N.C

: IN : Not in use.

pin 68 : DISP_REM

: O : The power supply control signal output for LCD

power and LCD backlight.

pin 69 : ILL_REM

: O : The power supply control signal output for

illumination.

pin 70 : KEY_INT

: IN : Key interrupting signal input.

pin 71 : INT_AMPREM : O : ON signal output to the internal amplifier.
pin 72 : AMP_REMOUT: O : The control signal output to internal audio power

amplifier.

pin 73 : AUTO_ANT

: O : Motor antenna control signal output.

pin 74 : PHONE_INT

: IN : The telephone interrupt signal input.

pin 75 : RDS TEST 1

: O : The power supply ON signal output for the

pin 76 : RDS TEST 2

: IN : For debug when RDS TEST.

pin 77 : N.C

: O : Not in use.

pin 78 : N.C

: IN : Not in use.

pin 79 : JOG_CW

: IN : JOG key signal input.

pin 80 : JOG_CCW

: IN : JOG key signal input.

pin 81 : CD TEST

: O : For CD mecha test pin.

pin 82 : ILL_DET

: IN : illumination ON signal input.

pin 83 : CTRL

: O : Power supply ON signal input.

pin 84 : OFFSET_DET : IN : The emergency signal input from the power IC.
pin 85 :

RDS_TEST_DSR

: IN : The communication control signal input for RDS

PC test.

pin 86 :

RDS_TEST_DTR

: O : The communication control signal output for

RDS PC test.

pin 87 : VERG

: O : The reference voltage.

pin 88 : VSS

: - : Connect to GND.

pin 89 : VDD

: - : Positive voltage supply, connect to 5V.

pin 90 : OSC_FM/AM : IN : FM/AM oscillation input.
pin 91 : N.C

: IN : Connect to GND.

pin 92 : FM/AM_IFC

: IN : FM/AM IF signal input.

pin 93 : N.C

: IN : Connect to GND.

pin 94 : EO

: O : PLL phase compare ERROR output.

pin 95 : SUBPD

: O : For high speed lock up.

pin 96 : FM ON

: O : The power supply control signal outpur for tuner

FM+B.

pin 97 : AM ON

: O : The power supply control signal outpur for tuner

AM+B.

pin 98 :

MUTE_SPEED_UP

: O : Station detection speed up command output

for RDS.

pin 99 : FM-ST/SD

: IN : At receiving the FM station, this port detects

the stereo signal. At seeking or scanning, this
port detects the station detection signal.

pin100 : RDS_DATA

: IN : RDS serial data input.

051-6743-00

LC786920E

CMOS LSI for compact disc player

Terminal Description
pin 1 : EFMIN

: IN : RF signal input terminal.

pin 2 : RFOUT

: O : RF signal output terminal.

pin 3 : LPF

: O : RF signal DC label detection LPF capacitor

connection terminal.

pin 4 : PHLPF

: O : Wound detection LPF capacitor connection

terminal.

pin 5 : AIN

: IN : A signal input terminal.

pin 6 : CIN

: IN : C signal input terminal.

pin 7 : BIN

: IN : B signal input terminal.

pin 8 : DIN

: IN : D signal input terminal.

pin 9 : SLCISET

: IN : SLCO output Resistance connection terminal.

pin 10 : RFMON

: O : Inside LSI analog signal monitor terminal.

pin 11 : VREF

: O : VREF voltage output terminal.

pin 12 : JITTC

: O : Getta detection capacitor connection terminal.

pin 13 : EIN

: IN : E signal input terminal.

pin 14 : FIN

: IN : F signal input terminal.

pin 15 : PCNCNT

: IN : EFM PLL Charge Pump Control voltage input

terminal.

pin 16 : TE OUT

: O : TE signal output terminal.

pin 17 : TE IN

: IN : TES signal generation input terminal.

pin 18 : LDD

: O : Laser power control signal output terminal.

pin 19 : LDS

: IN : Laser power control signal input terminal.

pin 20 : AVSS

: - : Connect to GND.

pin 21 : AVDD

: - : Analogue power supply terminal.

pin 22 : FDO

: O : Focus signal output terminal. D/A output.

pin 23 : TDO

: O : Tracking signal output terminal. D/A output.

pin 24 : SLDO

: O : Thread signal output terminal. D/A output.

pin 25 : SPDO

: O : Spindle signal output terminal. D/A output.

pin 26 : VVSSI

: - : Connect to GND.

pin 27 : PDOUT1

: O : Built-in VCO control phase comparison output

terminal 1.

pin 28 : PDOUT0

: O : Built-in VCO control phase comparison output

terminal 0.

pin 29 : PCKIST

: IN : PDOUT0 output 1 Resistance connection terminal.

pin 30 : VVDD1

: - : Connect to GND.

pin 31 : DMUTEB

: O : Not in use.

pin 32 : PUIN

: I/O: PUIN input output terminal.

pin 33 : DEFECT

: O : Wound detection signal output terminal.

pin 34 : FSEQ

: O : Synchronous signal output terminal, It becomes

"H" when Synchronous Idle detected from the

EFM signal is corresponding to Synchronous Idle
of internal generation.

pin 35 : C2F

: O : C2 error signal output terminal.

pin 36 : DVDD

: - : Digital system power supply terminal.

pin 37 : DVSS

: - : Digitalsystem earth terminal, Must connect to 0V.

-4-

DB188/189RMP/DB189RGMP

Содержание DB188RMP



















Результаты поиска

Содержание DB188RMP

Отзывы:

Похожие инструкции для DB188RMP

Бренды по названию

Популярные бренды

Clarion DB188RMP, Руководство по обслуживанию

Результаты поиска

Содержание DB188RMP

Отзывы:

Похожие инструкции для DB188RMP

Бренды по названию

Популярные бренды