25
CZ215A/CZ315A
English
8. INSTALLATION/WIRE CONNECT
GUIDE
Before Starting
1. This set is exclusively for use in cars
with a negative ground, 12 V power
supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “
-
”
terminal before starting. This is to
prevent short circuits during installation.
(Figure 1)
Figure 1
Car battery
Figure 1
Package Contents
Main unit .................................................1
Owner’s manual & Installation manual ....1
Power extension lead .............................1
Mounting bracket ....................................1
Outer escutcheon............................1
Strap .......................................................1
Parts bag ................................................1
•
Hexagonal bolt ................................1
•
Removal key ....................................2
•
Stopper.............................................1
General Cautions
1. Do not open the case. There are no user serviceable parts inside. If you drop anything
into the unit during installation, consult your dealer or an authorized Clarion service
center.
2. Use a soft, dry cloth to clean the case. Never use hard cloth, thinner, benzene, alcohol,
etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt
gently.
Cautions on Installation
1. Prepare all articles necessary for installing the main unit before starting.
2. Install the unit within 30° of the horizontal plane. (Figure 2)
3. If you have to do any work on the car body, such as drilling holes, consult your car
dealer beforehand.
4. Use the enclosed screws for installation. Using other screws can cause damage.
(Figure 3)
Max. 30˚
Figure 2
Figure 3
Max. 8 mm
Chassis
Chassis
Damage
Figure 2 Figure 3
CZ315A&CZ215A Owner's Guide A6 1205.indd 25
2015/1/16 11:21:18
