English
21
CZ209E/CZ209ER/CZ209EG
If an error occurs, one of the following messages is displayed.
Take the measures described below to eliminate the problem.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your dealer.
USB/iPod
No sound
The device contains no MP3/
WMA files.
Record MP3/WMA files properly to the device.
The files are not proper MP3/
WMA format.
Use properly encoded MP3/WMA files.
Connectors are loose.
Disconnect the device and reconnect securely.
Some USB portable music
players may consume current
that exceeds the USB rating.
In this case, this unit’s
overcurrent protection circuit
operates to stop the music
playback.
Check operation of portable music player.
Sound is
interrupted or has
noise.
MP3/WMA files are not
encoded properly.
Use properly encoded MP3/WMA files.
Device isn’t
recognized.
Device is damaged.
Disconnect and reconnect the device. If device still
cannot be recognized, try replacing with different
device.
Connectors are loose.
According to the device’s
operation state, device may
not be recognized.
Disconnect and reconnect the device.
Cannot connect
device to the USB
cable.
Device has been connected
improperly.
Connect the device in reverse direction.
Connector is broken.
Replace with a new device.
Problem
Cause
Measure
8. ERROR DISPLAYS
Error Display
Cause
Measure
CD/MP3
/WMA
ERROR 2
A CD is caught inside the CD
deck and is not ejected.
This is a failure of the CD deck mechanism.
Consult your dealer.
ERROR 3
A CD cannot be played due to
scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6
A CD is loaded upside-down
inside the CD deck and does not
play.
Eject the disc and reload properly.
USB
/iPo
d
ERROR 2
(iPod mode)
During the iPod analyse, failure
to achieve the iPod state or
initialize the iPod driver, unusual
detection of iPod driver.
Switch to the iPod mode again, reset the unit and
iPod.
ERROR 3
(iPod mode)
During the playback, failure to
achieve the iPod state, unusual
detection of iPod driver.
Switch to the iPod mode again.
ERROR 5
(iPod mode)
The connected iPod is not
recognized.
Disconnect and reconnect the iPod.
ERROR 7
(USB mode)
USB memory device format
error.
Disconnect and reconnect USB memory device. If
device still cannot be recognized, try replacing
with different USB memory device.
Downloaded from Caradio-Manual.com Manuals
