Clarion CZ209A, Руководство пользователя

Страница: 8 / 22

Engli
s
h
9
CZ209A
Sound Adjustment
Sound effects and tone can be adjusted as
desired.
●
Setting the Z-Enhancer Plus
This unit has 4 sound tone effects stored in
memory.
Select the effect you prefer.
∗
The factory default setting is “ OFF ”.
2-1. Select “ Z-EHCR+ ”.
3-1. When you turn the [ ROTARY ] knob, the
tone effect changes as follows:
“ OFF ”
↔
“ B-BOOST ”
↔
“ IMPACT ”
↔
“ EXCITE ”
↔
“ CUSTOM ”
OFF : No sound effect
B-BOOST : Enhanced bass
IMPACT : Enhanced bass and treble
EXCITE : Enhanced bass, mid, and
treble
CUSTOM : User customized
When set to “B-BOOST/IMPACT/EXCITE”:
3-2. Press the [ ] button.
3-3. Turn the [ ROTARY ] knob to adjust the
setting (Setting range: –3 to +3).
∗
The factory default setting is “
0
”.
3-4. Press the [ ] button to return to the
previous mode.
When set to “CUSTOM”:
3-2. Press and hold the [ ] button (1 sec.).
Bass/treble characteristics become flat and
“
FLAT ” is show in the display.
3-3. Turn the [ ROTARY ] knob to change to the
“ OFF ” mode.
●
Adjusting the bass
This adjustment is supported only when
Z-Enhancer Plus is set to “
CUSTOM ”.
2-1. Select “
BASS
”.
3-1. Press the [ ] button.
3-2. Press [
x
] or [
v
] to change and select
settings as follows:
“ B<G 0> ”
↔
“ B<F 60> ”
↔
“ Q 1 ”
3-3. Turn the [ ROTARY ] knob to adjust values
for gain, F (center frequency) and Q curve.
B<G 0> :The factory default setting is “ 0 ”.
(Adjustment range: +7 to –7)
B<F 60> :The factory default setting is
“
60 ”.
(Adjustment range:
60/80/100/200)
Q 1 :The factory default setting is “ 1 ”.
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [ ] button to return to the
previous mode.
●
Adjusting the treble
This adjustment is supported only when
Z-Enhancer Plus is set to “
CUSTOM ”.
2-1. Select “ TREBLE ”.
3-1. Press the [ ] button.
3-2. Press [
x
] or [
v
] to change and select
settings as follows:
“ T<G 0> ”
↔
“ T<F 10K> ”
3-3. Turn the [ ROTARY ] knob to adjust values
for gain and F (center frequency).
T<G 0>
: The factory default setting is “
0
”.
(Adjustment range: +7 to –7)
T<F 10K> : The factory default setting is
“ 10K ”.
(Adjustment range: 10K/12.5K/
15K/17.5K)
3-4. Press the [ ] button to return to the
previous mode.
To change sound settings
1. Press the [ SOUND ] button to switch to the
sound adjustment display.
∗
The factory default sound setting is “ Z-
EHCR+ ”.
2. Press [
x
] or [
v
] to select the sound
adjustment mode.
Each time [
x
] or [
v
] is pressed, the
sound adjustment mode changes as
follows:
“
Z-EHCR+
”
↔
“
BASS
”
↔
“
TREBLE
”
↔
“ BALANCE ”
↔
“ FADER ”
↔
“ NF VOL ”
∗
When “ ENT ” is flashing in the display, press
the
[ ] button to adjust the setting value.
∗
The sound adjustment mode is displayed
for 2 seconds before showing the sound
setting.
3. Turn the [ ROTARY ] knob to adjust the
selected audio mode.
4. After completing settings, press the
[ SOUND ] button to return to the previous
mode.