Clarion CZ102E, Руководство пользователя, Страница: 9 / 14

8
English CD/MP3/WMA Operations
Press [
SRC /
] button on the panel to select
“
AUX
”.
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the [
DISP
] button (1 sec.).
2. Turn the [
VOLUME
] knob to select “
AUX
SENS
”.
3. If the output level of connected external audio
player is “
HIGH
”, rotate [
VOLUME
] knob
and choose “
LOW
”. And if the output level is
“
LOW
”, choose “
HIGH
”.
AUX Operations
3. Press [
2
] button repeatedly until “ RPT OFF ”
appears on the display to cancel repeat
playback, and “ RPT ” segment goes off.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [
3
] button to perform random play.
6. TROUBLE SHOOTING
GENERAL
Problem Cause Measure
Unit can not
power on.
Unit fuse blown. Replace with new fuse of correct rating.
Car battery fuse blown. Replace with new fuse of correct rating.
Unit can not
power on.
Nothing happens
when buttons are
pressed.
Display is not
accurate.
The microprocessor has
malfunctioned due to noise, etc.
Turn off the power and remove the DCP.
Press the [ RESET ] button with a thin rod.
Note:
When the [ RESET ] button is pressed, turn
off the ACC power.*
* When the [ RESET ] button is pressed,
preset radio stations, titles, etc. stored in
memory are kept.
No/low audio
output.
Improper audio output
connection.
Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume balance. Adjust the channel balance to center
position.
Speaker wiring is in contact with
metal part of car.
Insulate all speaker wiring connections.
Poor sound
quality or
distortion.
Non-standard disc used. Use a standard disc.
Speaker power rating does not
match unit.
Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Tel-Mute
malfunction.
MUTE wire is grounded. Check the MUTE wiring and correct.
Unit resets itself
when engine
is off.
Incorrect connection between
ACC and Battery.
Check wiring and correct.