Clarion CX501E, Руководство пользователя

Страница: 8 / 32

En
g
lish
8
CX501E
5. OPERATIONS
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “ 3. CONTROL S ” on page 5.
Basic Operations
CAUTION
Be sure to lower the volume before
switchin
g off the unit power or the i g nition
key. The unit remembers its last volume
settin
g .
Turning on/off the power
1. Press the [ SOURCE ] button to turn on the
power.
2. Press and hold the [ SOURCE ] button
(1 sec.) to turn off the power.
S electing a mode
1. Press the [ SOURCE ] button to change the
operation mode.
Radio
➜
CD/MP3/WMA
➜
USB/iPod
➜
BLUETOOTH
➜
AUX
➜
Radio...
∗
iPod can connect to this unit via USB
connector.
∗
iPhone can also be connected to this system
and “iPod” appearing in this manual should be
referred to as “iPod/iPhone”.
Adjusting the volume
1. Turning the [ ROTARY ] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
∗
The volume level is from 0 (minimum) to 33
(maximum).
S witching the display
Press the [ DISP ] button to select the desired
display.
S ound Adjustment
You can adjust a sound effect or tone quality to
your preference.
●
Settin g the BEAT EQ
This unit is provided with 4 types of sound tone
effects stored in memory.
Select the one you prefer.
∗
The factory default setting is “ OFF ”.
2-1. Select “ BEAT EQ ”.
3-1. Each time you turn the [ ROTARY ] knob,
the tone effect changes in the following
order:
“ CUSTOM ”
↔
“ EXCITE ”
↔
“ IMPACT ”
↔
“ B-BOOST ”
↔
“ OFF ”
CUSTOM : user custom
EXCITE : bass and treble emphasized
mid emphasized
IMPACT : bass and treble emphasized
B-BOOST : bass emphasized
OFF
: no sound effect
To change sound setting
1. Press the [ SOUND ] button to switch to the
sound adjustment selection display.
∗
The factory default sound setting is
“
BEAT EQ ”.
2. Then press the [
x
] or [
v
] button to
select the sound adjustment mode.
Each time you press the [
x
] or [
v
]
button, the sound adjustment mode
changes as following order:
“ BEAT EQ ”
↔
“ M-B EX ”
↔
“ BALANCE ”
↔
“ FADER ”
↔
“ LPF ”
↔
“ S-W VOL ”
↔
“
PHASE
”
↔
“
HPF
”
∗
In the case of display blinking “ ENT ”, you
can press the [
ROTARY
] knob to adjust the
setting value.
3. Turn the [ ROTARY ] knob to adjust the
selected sound mode.
4. After completing settings, press the
[ SOUND ] button to return to the previous
mode.
CX501E_EN.book Page 8 Thursday, November 11, 2010 1:16 PM