English
7
CX305AU
System Setup
Press the
[ ]
button to enter sound effect
setting mode. First press shows current EQ.
Rotate the
[VOLUME]
knob to changes BEAT
EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Rotate the
[VOLUME]
knob to changes
CUSTOM, and press the
[VOLUME]
knob,
the press
[
]
or
[
]
button to select it
including: BASS-G -> BASS-F -> BASS-Q ->
MID-G -> MID-F -> MID-Q -> TREBLE-G ->
TREBLE-F -> TREBLE-Q, rotate the
[VOLUME]
knob to select a value.
BASS-G / MID-G / TREBLE-G: (-7)- (+7)
BASS-F: 50 / 100 / 200
BASS-Q: 0.7 / 1.0 / 1.4 / 2.0
MID-F: 500 /1K / 2K
MID-Q: 0.7 / 1.0 / 1.4 / 2.0
Audio Setup
TREBLE-F: 5k / 10k / 15k
TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0
Press the
[ ]
button, then press
[
]
or
[
]
button to select USER preset
including:
BALANCE -> FADER -> M-B EX -> HPF
(high pass filter) -> LPF (low pass filter) ->
SUBW VOL (Subwoofer Volume), rotate the
[VOLUME]
knob to select a value.
BALANCE: LEFT 1-7 -> CENTER -> RIGHT
1-7
FADER: FRONT 1-7 -> CENTER -> REAR
1-7
M-BEX: ON / OFF
HPF: THROUGH / 60 / 90 / 120
LPF: THROUGH / 60 / 90 / 120
SUBW VOL: (-6) - (+6)
>ALBUM->FILE...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press
[DISP]
button.
REAR/S-W
Rotate the
[VOLUME]
knob to choose REAR
or S-WOOFER (SUB-WOOFER).
SW PHASE
Rotate the
[VOLUME]
knob to choose
SUBWOOFER phase REVERSE or NORMAL.
TEL-SW
Rotate the
[VOLUME]
knob to choose MUTE,
ON or OFF.
•
MUTE
:
The sound from this unit is muted during
telephone calls.
•
OFF
:
This unit continues normal operation even
when the cellular phone is used.
•
ON
:
You can listen to your telephone calls from the
speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the
[VOLUME]
knob.
PANDORA ON/OFF
Select OFF if the Pandora application has
not been installed on your iPod or iPhone.
DIMMER: ON/OFF
Rotate the
[VOLUME]
knob to choose
DIMMER ON or OFF.
•
ON
: LCD dimmer is active when small
light of vehicle is turned ON.
•
OFF
: LCD always maximum brightness
regardless of the vehicle small
light.
BEEP: ON/OFF
Rotate the
[VOLUME]
knob to choose
button beep sound ON or OFF.
12/24H
Rotate the
[VOLUME]
knob to choose time
format: 12 or 24 hours.
Select tuner as playing source
Press
[
/
SRC]
button once or more to enter
RADIO
mode.
Selecting the radio band
Press the
[BAND]
button on the panel or on
the remote control to select one radio band
among FM1, FM2, FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the
[
]
or
[
]
button on the panel
to tune in a lower / higher station.
Press the
[
]
or
[
]
button on the remote
control to select preset stations.
Auto tuning
Press and hold the
[
]
or
[
]
button to
seek a lower / higher station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the
[SCN/PS/AS]
on the remote
control button.
2. When a desired station is tuned in,
press the
[SCN/PS/AS]
button again to
continue receiving that station.
Note:
Be careful not to press and hold the
[SCN/
PS/AS]
button for 1 second or longer,
otherwise the auto store function will begin
and the unit starts storing stations.
Radio Operations
Auto store
The unit stores the strongest stations found
in the entire Band.
Press and hold the
[BAND
/
AS/ ]
button (1
sec.) or
[PS/AS]
button on the remote control
to start automatic station search.
To stop auto store, press other buttons having
radio functions.
Notes:
1. After auto store, the previous stored stations
will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store by AS
function. Each band can store 6 stations,
CX305AU can store 24 stations in total.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6
to store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is ON, only those
radio
stations with strong radio signal could be received.
To select LOCAL function, press and hold the
[ DISP ]
button on the front panel, then press
[
]
button repeatedly until
LO
or
DX
displays
on the screen, and rotate the
[VOLUME]
knob
to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease when Local mode is
ON.
