11
BLT373
Pairing Sequence
Note:
• Please refer to Clarion
Bluetooth
®
Audio Transmitter and Cradle for iPod owner’s
manual for the
Bluetooth
®
Audio Transmitter operation below.
Between
Bluetooth
®
Audio/Mobile-phone Transceiver and
Bluetooth
®
Audio Transmitter
1. Make sure the Transmitter is connected to an audio source.
2. Make sure the car stereo source mode is switched to ‘
AUX
’ mode.
3. Set the Transceiver unit in pairing mode. Please refer “
Activating
Bluetooth
®
Transceiver pairing mode
” on page 17.
4. Set the Transmitter unit in pairing mode.
5. Music starts automatically upon successful pairing.
Notes:
• You do not have to enter a dedicated pin code for pairing these two devices, as
you do with a mobile phone.
• During pairing mode, the Transceiver unit should show a slower alternate red/blue
LED. Make sure that the Transmitter and Transceiver are not paired to any other
Transceiver or Transmitter respectively.
• Please refer “
Understanding The Transceiver Unit Indicators
” on page 16 for
further details.
4. INTRODUCTION TO
BLUETOOTH
®
“PAIRING”
1EN_OM_Receiver BLT373.indd 11
6/4/07 12:13:52 PM
