10
DB248R/DB148R/BD149RG
English
Adjusting the bass
1. Press the [
A-M
] button and select “
BASS
”.
2. Turning the [
ROTARY
] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗
The factory default setting is “
0
”. (Adjustment
range: –7 to +7)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting the treble
1. Press the [
A-M
] button and select “
TREB
”.
2. Turning the [
ROTARY
] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗
The factory default setting is “
0
”. (Adjustment
range: –7 to +7)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [
A-M
] button and select “
BAL
”.
2. Turning the [
ROTARY
] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗
The factory default setting is “
0
”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [
A-M
] button and select “
FAD
”.
2. Turning the [
ROTARY
] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗
The factory default setting is “
0
”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Turning on/off MAGNA BASS
EXTEND
To adjust the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound ad-
justment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
∗
The factory default setting is off. Press and hold
the [
A-M
] button for 1 second or longer to turn the
MAGNA BASS EXTEND and “
M-B EX
” in the dis-
play lights on or off.
CT (Clock Time) function
The CT function enables you to display clock
time only when CT data is received.
Press and hold the [
BND
] button, and then
press the [
DISP
] button, the display switches to
CT (Clock Time).
∗
When no CT data is received, “
CT––:––
” appears
in the display.
Note:
• There are some countries and stations where
clock time data are not transmitted. In some ar-
eas, the CT may not be displayed correctly.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗
This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
∗
The factory default setting is “
TEL OFF
”.
Press and hold the [
BND
] button, and then press
the [
s
] to select the “
TEL ON
” or “
TEL OFF
”.
TEL ON:
mutes the audio sound.
TEL OFF:
does not mute the audio sound.
Illumination dimmer function
When the illumination line of this unit is con-
nected with the car-side illumination signal line,
the display illumination of this unit dims in con-
nection with turning on the car-side illumination.
Basic Operations
