8
AX430
7. OPERATION
Note:
• Be sure to read this chapter referring to the front diagrams of chapter
“2. CONTROLS”
on page 3 (unfold).
Basic Operation
CAUTION
Adjusting the Treble
1) Press [
A-M
] button and select
“TREB”
.
2) Turning the [
ROTARY
] knob clockwise empha-
sizes the treble; turning it counterclockwise at-
tenuates the treble.
* The factory default setting is
“0”
. (Adjustment
range: –6 to +6)
3) When the adjustment is complete, press [
A-M
]
button several times until the function mode is
reached.
Adjusting the Balance
1) Press [
A-M
] button and select
“BAL”
.
2) Turning the [
ROTARY
] knob clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
* The factory default setting is
“0”
. (Adjustment
range: L9 to R9)
3) When the adjustment is complete, press [
A-M
]
button several times until the function mode is
reached.
Adjusting the Fader
1) Press [
A-M
] button and select
“FAD”
.
2) Turning the [
ROTARY
] knob clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
* The factory default setting is
“0”
. (Adjustment
range: F9 to R9)
3) When the adjustment is complete, press [
A-M
]
button several times until the function mode is
reached.
Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored in memory. Select the one you pre-
fer.
* The factory default setting is
“Z-EHCR OFF”
.
Each time you press [
Z-EHCR
] button, the tone
effect changes in the following order.
“Z-ENHANCER 1”
➜
“Z-ENHANCER 2”
➜
“Z-ENHANCER 3”
➜
“Z-EHCR OFF”
➜
“Z-ENHANCER 1”
...
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
1) Press the [
FNC
] button.
* To turn the power off, press the [
FNC
] button
for at least 1 second.
2) Press the [
FNC
] button to select the opera-
tion mode. The mode switches as follows each
time the [
FNC
] button is pressed:
Radio
➜
Tape
➜
CD changer
➜
Radio
* If a component is not connected, that opera-
tion mode cannot be selected.
*
“CASS”
appears when no tape is loaded in
the source unit, and
“DISC”
appears when
no disc is loaded in the CD changer.
3) Turning the [
ROTARY
] knob clockwise in-
creases the volume; turning it counterclock-
wise decreases the volume.
* The volume level is from 0 (minimum) to 33
(maximum).
Audio Mode Adjustments
Press the [
A-M
] button to select the adjustment
mode. The mode switches as follows each time
the [
A-M
] button is pressed:
BASS
➜
TREB
➜
BAL
➜
FAD
➜
Previous mode
Adjusting the Bass
1) Press [
A-M
] button and select
“BASS”
.
2) Turning the [
ROTARY
] knob clockwise empha-
sizes the bass; turning it counterclockwise at-
tenuates the bass.
* The factory default setting is
“0”
. (Adjustment
range: –6 to +6)
3) When the adjustment is complete, press[
A-M
]
button several times until the function mode is
reached.
