10
ADP6000
English
Control Panel
Levels
(0.3 - 5V)
Input gain adjustment control.
Set to Min position. Use a CD as source,
increase head unit volume until output distorts,
then reduce volume 1 step in order to eliminate
distortion. Increase LEVELS until the sound
becomes distorted and then reduce LEVELS a
little for optimum sound.
11
Levels
(0.3 - 5V)
Input gain adjustment control.
Set to Min position. Use a CD as source,
increase head unit volume until output distorts,
then reduce volume 1 step in order to eliminate
distortion. Increase LEVELS until the sound
becomes distorted and then reduce LEVELS a
little for optimum sound.
6
HI PASS (50 Hz - 1 kHz)
Adjustment of the HIPASS crossover point.
Rotating the knob you can select any frequencies
between 50Hz and 1kHz.
7
LO PASS (250 Hz - 1 kHz)
Adjustment of the LOPASS crossover point.
Rotating the knob you can select any frequencies
between 250Hz and 5kHz.
8
B Input (PREOUT - ON)
Select PRE OUT in order to activate a
preamplified full range output
(page 8 - ).
Inputs A PREIN or A SPEAKERS IN drives A
CHANNELS and B CHANNELS.
Select ON to drive B CHANNELS by B PREIN
or B SPEAKERS IN inputs.
9
7
Filter
(FULL - BAND - HI)
Select FULL to drive full range power outputs.
The full frequencies bandwith will be output to
power output connectors.
Select BAND to drive a MIDRANGE. Use HI
PASS and LO PASS to adjust BAND PASS action
Select HI to drive a MIDRANGE or a TWEETER.
Adjuster LO PASS is not operative.
In HI or BAND mode, the frequencies below and
above crossover point will be attenuated at 12dB/
octave.
10
LO PASS (50 Hz - 1 kHz)
Adjustment of the LOPASS crossover point.
Rotating the knob you can select any frequencies
between 50Hz and 1kHz.
12
Filter
(FULL - LO)
Select LO or FULL filter function. If full is selected,
the full frequencies bandwith will be output
to power output connection at C CHANNELS
output.
14
C Input (MIX(A+B) - ON)
Select MIX(A+B)
in order to drive C CHANNELS
by a sum of A and B INPUT signals.
If B INPUT selector is positioned to PRE OUT, C
CHANNELS is driven by A INPUT signals only.
Inputs A PRE IN or A SPEAKERS IN drives A
CHANNELS and B CHANNELS.
Select ON to drive C CHANNELS by C PRE IN
or C SPEAKERS IN inputs.
13
B CHANNELS
6
~
10
C CHANNELS
11
~
16
Filter
(FULL - HI)
Select FULL to drive full range power outputs.
The full frequencies bandwith will be output to
power output connectors.
Select HI to drive a MIDRANGE/TWEETER.
In Hi mode, the frequencies below crossover
point will be attenuated with a 12dB/octave slope.
5
Range
(
x1 - x10
)
Multiplier for HIPASS filter. Selecting x1 you have
normal xover frequencies
(
50Hz - 500Hz
).
Selecting x10 the frequencies will be multiply by
10 (
500Hz - 5kHz
).
4
