6.
Swing:
press this key, the wind direction can swing flatly, and the swing indicator light
is on. It cancels this function when you press again.
7.
Anion:
press the key to start the clean air function.
8.
Display:
press this key to control the LCD light
5. THE USE OF REMOTE CONTROL
Fit on batteries, it can works. It have the same function as control panel. Should aim at the
remote control reception window when you use, and the effective distance is 6 meters.
When the remote control is not in use, please put away it for using next time.
Attention:
a. Do not mix old battery with the new one in use.
b. Please take out the batteries for long time nonuse.
c. The remote control has no mode key, so press the key by your hands.
6.
THE USE OF ICE BOX
The ice crystal has a particular feature of keeping cool, it can absorb heat from water and
let the water temperature in the water tank below environmental temperature, so the air
will be much cooler.
1. Add water to the ice box (not full) and put it into the refrigerating chamber of refrigera-
tor to make sure that it icing absolutely.
2. Open the door, put the frozen ice box into the water tank.
3 . There have two air boxes, can use circularly.
7.
CLEANING AND MAINTENANCE
WARNING: Ensure that the fan is switched off from the supply mains before removing
the air filter screen
.
1. Clean the air filter screen
Cut off the power supply, pull the handle of air filter screen, remove it from appliance.
Clean the air fliter screen with neutral detergent and banister brush, then clean it with
clear water. Finally, reinstall to the appliance.
2 . Clean the wetted pad
Cut off the power supply, take down the air filter screen, then draw the wetted pad from
support. Clean the wetted pad with neutral detergent and banister brush, then clean it
with clear water. Finally, reinstall to the appliance.
Attention: the wetted pad must be installed horizontally, in order to aviod leaking.
3. Clean the water tank
Cut off the power supply, open the door, take out the water tank, clean it with neutral
detergent, and wash it with clear water, then reinstall to the appliance.
4. Clean the shell
Clean with neutral detergent and soft cloth.
Attention: cut off the power supply when clean the appliance as there have a high
pressure in the body. Do not leave any water on the surface of control panel.
5
