Clare Controls HDBaseT CM-BT20-COMPACT-70-RX, Руководство пользователя

Страница: 11 / 24

HDBaseT Compact Extender Set 70m with ARC User Guide 3
(7) HDMI IN: Connect to the HDMI source device.
(8) HDBT OUT: Connects via a single Cat5e/Cat6 cable to the HDBaseT port on the
receiver and supports bi-directional PoH.
(9) 12 VDC: Connects to the power supply.
(10) ARC Switcher: Set the switch for ARC mode.
Figure 3: The HDBaseT- CM-BT20-COMPACT-70-TX (front and rear panels)
(1) LINK: The HDBT Link status indicator. It illuminates when the CM-BT20-
COMPACT-70-TX and RX are linked and communicating.
(2) HDCP The HDCP compliant indicator.
 Illuminates when the output signal is HDCP
 Blinks when the output signal is not HDCP
 Extinguishes when there is no output
(3) Power LED: Illuminates when the device is receiving power.
(4) IR IN: Connects to a 12v IR receiver, or the provided adapter cable. The IR
signal received from this port is transmitted via HDBaseT to the
HDBaseT CM-BT20-COMPACT-70-TX unit for use at the source
location.
(5) IR OUT: IR signals received by the HDBaseT CM-BT20-COMPACT-70-TX and
sent via HDBaseT to the HDBaseT CM-BT20-COMPACT-70-RX are
available for emitter use from this port.
(6) HDMI OUT: Connect to the HDMI display device.
(7) HDBT IN Connects via single Cat5e/Cat6 cable to the HDBaseT port on the
transmitter and supports bi-directional PoH.
(8) 12 VDC Connects to the power supply.