Clare Controls HDBaseT-C.rx70, Руководство пользователя, Страница: 10 / 20

2 HDBaseT Compact Extender Set 70m User Guide
Product appearance
Figure 1: The HDBaseT-C.tx70 transmitter
(1) HDMI IN: Connect to the HDMI source device.
(2) IR IN:
Connects to an IR receiver. The IR signal received from this port will be
transmitted via HDBaseT to the transmitter unit for use at the source
location.
Note: When using a control system, such as Clare Controls, the adapter
cable (included) must be used. The male mono end connects to the
control system; the male stereo end connects to the HDBaseT-C.tx70.
(3) IR OUT: IR signals received by receiver and sent via HDBaseT to the transmitter
are available for emitter use from this port.
(4) Power LED: Illuminates when the device is receiving power.
(5) DC 12V: Connects to the power supply
(6) HDBT OUT: Connects via a single Cat5e/Cat6 cable to the HDBaseT port on the
receiver.
Figure 2: The HDBaseT-C.rx70 receiver
(1) HDMI OUT: Connect to the HDMI display device.
(2) IR IN: Connects to an IR receiver. The IR signal received from this port is
transmitted via HDBaseT to the HDBaseT-C.tx70 unit for use at the
source location.
(3) IR OUT: IR signals received by the HDBaseT-C.tx70 and sent via HDBaseT to
the HDBaseT-C.rx70 are available for emitter use from this port.
(4) Power LED: Illuminates when the device is receiving power.
(1) (2)
(3) (4) (5) (6)
(1) (2) (3) (4) (5)