Clare Controls CV-P3D10-ODHIWM, Руководство по установке, Страница: 7 / 52

3
CAUTIONS
 Make sure the power supply voltage is correct before using
the camera.
 Do not drop the camera or subject it to physical shock.
 Do not touch CMOS modules with fingers. If cleaning is
necessary, use a clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
replace the lens cap to protect the CMOS from dirt.
 Do not aim the camera at the sun or exceedingly bright
places. Blooming or smearing may occur (which is not a
malfunction), and affect the endurance of CMOS at the same
time.
 The CMOS may be burned out by a laser beam, so when
laser equipment is in use, make sure that the surface of
CMOS will not be exposed to the laser beam.
 Do not expose the camera to high electromagnetic radiation,
extremely hot or cold environments (the operating
temperature should be -30 to +60
℃
), or dusty or damp
locations.
 To avoid heat accumulation, good ventilation is required for
operating environment.
 Keep the camera away from liquid while in use.
 When returning a camera, pack it in its original packing, or
similar packing materials.
 Improper use or replacement of the battery may result in
hazard of explosion. Replace it with the same or equivalent
type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.