Clare Controls CM-BT10-TXRX70, Руководство пользователя

Страница: 10 / 20

4 HDBaseT Extender Set 70m User Guide
System connection
Usage precautions
•
System should be installed in a clean environment and have proper temperature
and humidity controls.
•
All of the power switches, plugs, sockets, and power cords should be insulated for
safety.
•
All devices should be connected before powering on.
•
The Cat5e/Cat6 terminations for HDBaseT devices should be a straight-thru
TIA/EIA T568B standard.
Application examples
The CM-BT10-RX70 HDBaseT receiver works in conjunction with the CM-BT10-TX70
HDBaseT transmitter or an HDBaseT matrix switch, such as the CM-MT4410-BT-70.
By transmitting signals across reliable Cat5e/Cat6 cables, the video signal can be used
at far greater distances from the source device than would be capable with traditional
HDMI cables. Additionally, control signals can be sent bi-directionally across the same
Cat5e/Cat6 cable. The following figures show you some application examples for the
CM-BT10-TXRX70 extender set and/or the CM-BT10-RX70 receiver.
Note: When using a control system, such as Clare Controls, Crestron, or URC, the
3.5 mm male mono to 3.5 mm male stereo adapter cable (included) must be used. The
male mono end connects to the control system; the male stereo end connects to
CM-BT10-TX70.