Clare Controls CM-BT10-RX70, Руководство пользователя

Страница: 6 / 16

2 HDBaseT Receiver 70m User Guide
Product appearance
Figure 1: The HDBaseT receiver
(1) IR IR receiver.
(2) ON Working status indicator. When the CM-BT10-RX70 is on and working
properly, the green LED blinks.
(3) LINK HDBaseT link status indicator, green LED. Remains illuminated when
there is a connection.
(4) OUT The LED remains illuminated when connected with devices that support
HDCP and HDCP handshake is working normally. If the devices do not
support HDCP, this green LED blinks.
(5) POWER LED The red LED illuminates and stays illuminated when power is connected.
(6)HDBT IN Connects via single Cat5e/Cat6 cable to the HDBaseT port in the
CM-BT10-TX70 transmitter or the CM-MT4410-BT-70 matrix switch.
(7) HDMI OUT: Connect to the HDMI display device.
(8) IR IN: Connects to an IR receiver. The IR signal received from this port is
transmitted via HDBaseT to the transmitter unit for use at the source
location.
Note: When an IR receiver connects to this port, the front IR port (1) is
unavailable.
(9) IR OUT: IR signals received by the CM-BT10-TX70 or CM-MT4410-BT-70 and
sent via HDBaseT to the CM-BT10-RX70 are available for IR emitter use
from this port.
(10) RS232: RS232 connector. Supports bi-directional RS232 communication.
(11) 24V DC: Connects to the power supply. Not required when using PoC supplied by
the CM-BT10-TX70 or CM-MT4410-BT-70.