Clare Controls ClareVision CV-P64010, Руководство по установке

Страница: 13 / 36

ClareVision Network Video Recorder Installation Guide 9
Rear panel
No. Item Description
1 VIDEO OUT BNC connector for video output.
2 CVBS AUDIO OUT BNC connector for audio output. This connector is
synchronized with CVBS video output.
VGA AUDIO OUT BNC connector for audio output. This connector is
synchronized with VGA video output.
3 LINE IN BNC connector for audio input.
4 RS-232 Interface Connector for RS-232 devices.
5 VGA DB9 connector for VGA output.
Display local video output and menu.
6 HDMI HDMI video output connector.
7 eSATA (Optional) Connects external SATA HDD, CD/DVD-RM
2 eSATA interfaces.
8 LAN Interface 2 network interface provided.
9 Termination Switch RS-485 termination switch
Up position is not terminated
Down position is terminated with 120 Ω resistance.
10 RS-485 Interface Connector for RS-485 devices. T+ and T- pins connect to
R+ and R- pins of PTZ receiver respectively.
Controller Port D+, D- pin connects to Ta, Tb pin of controller. For
cascading devices, the first NVR’s D+, D- pin should be
connected with the D+, D- pin of the next NVR.
ALARM IN Connector for alarm input.
ALARM OUT Connector for alarm output.
11 GROUND Ground (must be connected when NVR starts).
12 AC 100 V to 240 V AC 100 to 240 V power supply.
13 POWER Switch for turning on/off the device.
14 USB interface Universal Serial Bus (USB) ports for additional devices such
as USB mouse and USB Hard Disk Drive (HDD).