Doc ID - 1307 • REV 02
5 / 6
Figure 7: CS-iMR WOB connected to the CLIQ.mini
(1) CS-iMR WOB
(2) CLIQ.mini
(3) Chassis ground screw
(4) Power switch
(5) Ethernet cable
(6) CLIQ.mini Ethernet cable
adapter for CobraNet
(p/n TU-2ET100)
(7) Speaker outputs
(8) Audio flexports
Figure 8: CLIQ.mini USB ports
(1) USB port 1
(2) USB port 2
(3) CLIQ.mini
CS-iMR Specifications
Voltage
120 VAC
Analog-to-digital
conversion
24-bit 48 kHz
Digital-to-analog
conversion
24-bit 48 kHz
Output power
25 W per channel at 8 ohms
50 W per channel at 8 ohms
Frequency response
20 Hz – 20 kHz +/- 0.5 dB
(-3 dB at 60 kHz)
THD+N
<0.05% up to 50 W, 8 ohm at 6.67 kHz
EQ modes
5 band parametric EQ
Network audio latency
<7 ms
Network audio
synchronization
<1 ms
Amplifier monitoring
Over current, over voltage, over
temperature
Channels DSP
processing
16×16
Power (North America)
3 A at 120 VAC, 50/60 Hz
Power (International)
1.5 A at 220/240 VAC, 50/60 Hz
Speaker outputs
Left/Right 1-6, detachable terminal blocks
Accepts up to 14 AWG wire
Audio Flexports
Two unbalanced RCA stereo
Two can be configured as inputs or outputs
Impedance
Input: 10 kΩ
Output: 680 Ω
Sample rate
48 kHz
Resolution
24 bit
Ethernet
8-port Ethernet switch for other IP
controllable devices
CobraNet
Built-in, 4-port dedicated CobraNet
Ethernet switch
Power
One IEC 320 male chassis plug, 120V with
switch fused main power input
Dimensions (W × H × D) 13.0 × 3.5 × 17 in. (33.0 × 8.9 × 43.2 cm)
Housing
Metal, black finish
Operating temperature
32 to 105°F (0 to 40.5°C)
Regulatory information
Manufacturer
Clare Controls.
7519 Pennsylvania Ave, Suite 104
Sarasota, FL 34243
FCC compliance
This device complies with part 15 of the FCC
Rules.
