Page 4
SET-UP INSTRUCTIONS
5. Your shelter should be standing up completely
(Photo 5).
Anchor the shelter to the ice by using ice anchors and
straps.
Screw ice anchors into the ice near the corners of the
shelter and in the middle of the sides using Clam
’s Ice
Anchor Installation Tool PN 108348 (not included). Feed
the adjustable strap grommet onto the ice anchor and
cinch the strap tight
(Photo 6)
. Repeat for each anchor
drilled into the ice. In windy conditions, screw an anchor
outside the shelter several feet away from the hub on
the windward side and attach a strap found in the
pockets under each side panel hub from the hub eye
bolt to the remote anchor. Adjust strap so it is snug
between hub and anchor. This will help keep the shelter
in place and the walls from collapsing. If more anchors
are needed, order PN 108064 (pack of two) via
www.clamcorp.com.
Photo 5
Photo 6
Ice Anchors in corners. Shelter is
secured to the ice by hooking the
grommet on the strap to the anchor and
cinching the strap tight.
