Clam 116608, Руководство пользователя, Страница: 9 / 19

STEP-7
INSTALL ROPE
AND TIE OFF ENDS
INSIDE OF BASE.
BATTERY
BRACKET
HOLDER.
WIRE FROM LIGHT STICK SHOULD BE LOCATED ON SAME SIDE
AS BATTERY HOLDER
COMPLETED HOOP POLE ASSEMBLY AT THIS POINT SHOULD MOVE
FREELY AND LOOK LIKE THE FOLLOWING PICTURE.
DO NOT INSTALL FRONT
HOOP POLE AT THIS TIME
2 . ATTACH THE EXTENSION POLES TO THE
HINGE CLIP ASSEMBLY WITH FASTENERS
INCLUDED WITH CLIP ASSEMBLY AS SHOWN.
1 . SLIDE HOOP POLES OVER
TUBE EXTENSIONS AND LOCK
INTO PLACE WITH COLLARS.
HINGED POLE MUST ROTATE
FREELY ONCE TIGHTENED.
cLIP