Clam 108396, Инструкция по эксплуатации

Страница: 4 / 10

ASSEMBLY INSTRUCTIONS
Page 4
5. Your shelter should be standing up completely (Photo 9).
Anchor the shelter to the ice by using ice anchors and
ropes (Expedition models). For Expedition FLR
models skip to page 5.
Screw ice anchors into the ice near the corners of the
shelter using Clam’s Ice Anchor Installation Tool PN
108348 (not included). Feed the adjustable strap grommet
onto the ice anchor and cinch the strap tight
(Photo 10) .
Repeat for each anchor drilled into the ice. In windy
conditions you may need to screw an anchor outside the
shelter several feet away from the hub on the windward
side and attach a rope from the hub eye bolt to the remote
anchor. This will help keep the shelter in place and the
walls from collapsing. If more anchors are needed, order
PN 102457 via www.clamcorp.com/resources/parts.
Photo 10
Ice Anchors in corners. Shelter is
secured to the ice by hooking the
grommet on the strap to the anchor and
cinching the strap tight.