Clam Corp Fish Trap Voyager 8245, Инструкция по эксплуатации, Страница: 13 / 14

13
- S t e p T e n -
Angle the Seat Assembly slightly while placing the bottom lip of the Front Seat Bracket under the outside
edge of the Base lip.
Tilt the complete assembly downward so that the Rear Seat Bracket lands upon the Support Tube.
Reach under the Rear Seat Bracket and slide the Latch Clip outwards and then up against the underside of
the Support Tube. Squeeze the Latch Clip into the horizontal slot of the Rear Seat Bracket.
Secure the position of the Latch Clip by pushing it into the two holes located above the horizontal slot of
the Rear Seat Bracket.
WARNING: ALWAYS KEEP THE LATCH CLIP IN THE SECURED POSITION DURING USE. FAILURE
TO DO SO COULD RESULT IN INJURY FROM THE SEAT COMING OFF OF ITS MOUNTING SYSTEM.