H.264MP-MegaPixels RTSP Streaming User’s Manual
19
Please remember the
IP Address
，
Subnet Mask, Default Gateway
，
then setup the IP Camera
IP address according to your PC IP address to ensure
computer & IP Camera IP
addresses are
“
in the same subnet
”
.
For example : Set
IP Camera IP addresses
to
192.168.
1
.100.
Default Gateway
&
Subnet
Mask
same as PC.
Click
【
Set
】
to set
“
Network Parameter
”
as illustrated below:
Modify relative Network Parameters; click “
OK
”, then the IP camera will reboot.
Test the IP camera connection:
go to command mode by
click
【
Start
】
---
【
Run
】
”, then
input “
command
” or “
cmd
” (Windows 2000/XP system).click “
ok
”,
Type
“
ping 192.168.1.100
”
at command prompt
,
press “
Enter
” button, you will get following
information:
The message shown on above indicates the IP Camera is functioning normally and connects to
