Power Button / Auto Mode
Press and hold the power button for 1~2 seconds to turn on the air purifier.
- As soon as the device is turned on, it automatically starts running in auto mode.
(GREEN LED)
- In auto mode a smart air quality sensor will adjust the fan speed of the purifier
according to the air quality. The fan speed will increase until the target air quality has
been reached.
Operating instructions
Fan Speed
Clair K has three different fan speed levels and a turbo mode.
- Press the fan speed button to select the desired fan intensity.
- In turbo mode, the air purifier operates at maximum capacity. Press and hold the
button for 3 seconds to activate the turbo mode (LED-WHITE)
Night Mode / Filter Replacement Reset
When the night mode is activated, the air purifier operates quietly on the lowest
fan speed.
- Press the night mode button to activate the night-mode. (RED LED lights up).
- When the filter needs to be replaced, the GREEN LED lights up.
- After replacing the filter, press and hold the button for 3 seconds to turn off the LED
and reset the filter life time.
Child Lock
This function locks the control panel to prevent accidental operation by children.
- Press and hold the child lock button for 3 seconds to activate the lock mode.
- When the child-lock mode is activated, all other buttons are locked and cannot be used.
- Press and hold the child lock button for 3 seconds to unlock the child lock mode.
Clair K is equipped a highly sensitive air quality sensor which continuously measures pollution levels and provides
immediate visual feedback.
The air quality light automatically turns on when the air purifier is switched on, and lights up all colors in sequence.
After approximately 30 seconds, the air quality sensor selects the color that corresponds to the surrounding air quality.
Green = good air quality
Yellow = moderate air quality
Orange = poor air quality
Clean the air quality sensor every 2-3 months with a soft brush to ensure optimal performance of the purifier
Air Quality Indicator
