• After replacing the batteries, a new registration is not required.
• For the professional: After a reset at the water heater (refer to installing instructions, chapter “Reinstallation”)
a new registration is required!
• Only register again after performed work reset (all appliances) or when the remote control display continually
indicates “no”.
6. Initial operation
The remote control is equipped with the following functions:
1. Arrow keys
You can set the required temperature gradually to a lower or higher value using the arrow two keys and .
Note: If temperature is set to “--” with arrow key , the instant water heater switches off the heating
function.
2. Programme buttons
The two programme buttons and allow to quickly select the preset temperature without the need to press the
and buttons several times.
To save the current temperature, press the programme key or for about 2 seconds.
The factory setting for programme is 35°C and for programme it is 48°C. You can assign your own settings
for the programme keys:
• Select the desired temperature with and .
•
7. Handling
P.12
P.13