Tempo Hybrid
Tempo Hybrid
Page 8
WHAT THE DISPLAY SHOWS AFTER PROGRAMMING - Time page (1). After programming, the display goes
back to the time page.
The bottom of the time page shows the start time and the run time of the next planned watering cycle (in the
example, 30 minutes at 22:00).
Watering in progress page (2). When programmed watering starts (for example, at 22:00), the display shows:
the current day and time at the top, the remaining minutes at the bottom, the flashing symbol .
When watering has finished, the time page will once again appear on the display.
Tempo Hybrid (cod.): 8487
MANUAL WATERING. (1) Press any key to access the backlit display. Press and hold the indicated right key until
the screen below appears.
(2) Press the indicated keys + or - to set the required run time (from 5 seconds to 90 minutes in the example, 20
minutes ). If you press and hold the key it will move forward more quickly.
(3) Press the indicated key (ON) to start manual watering after a few moments. Press the indicated key (OFF) to
stop manual watering in advance.
(4) Press and hold the indicated key for a few seconds to go back to the TIME page. This additional watering does
not affect the programming which has already been set.
Tempo Hybrid (cod.): 8487
User manual
User manual
1
1
3
3
2
2
4
4
1
1
2
2
Current time
Current day
Minutes remaining until the
end of the programmed watering
ON
OFF
