Claas ROLLANT 250, Руководство по ремонту

Страница: 12 / 31

1.2.2
RHB ROLLANT 250 / 250 RC - 298 332.0
Safety rules
Identification of warning and danger signs
All parts of this manual having to do with your safety
or the safe operation of the machine are marked
with the following signs. Please pass all safety
instructions on to other users, too.
Danger!
Sign to indicate instructions which must be
observed. Failure to do so would cause
danger to life and limb to the operator and
the people around him.
☞
Preventive measures
Caution!
Sign to indicate instructions which must be
observed. Failure to do so could result in
damage to the machine.
☞
Measures to prevent damage to the
machine
Note!
Sign to indicate instructions for a more effi-
cient and economic use of the machine.
Important!
Sign to indicate instructions to be followed
during disassembly / assembly.
Environment!
Sign to indicate instructions which must be
observed in order to avoid damage to the environ-
ment.
Danger to the environment is caused by irregular
handling and incorrect disposal of toxic material
(e.g. used oil).
The warning and instruction signs placed on the
round baler provide recommendations for safe
operation. These instructions involve your safety –
observe them at all times!
Correct use of the round baler
Fitting and retrofitting of ancillary equipment which
is not originally manufactured by CLAAS, and, in
addition, also modifications and changes may only
be carried out with the consent of CLAAS, as any
such actions may have considerable adverse
effects on the safety and operational function of the
machine.
Any arbitrary modifications carried out on the round
baler will relieve the manufacturer of all liability for
any resulting damage or injury.
General safety and accident prevention
regulations
1. In addition to the instructions contained in this
manual, also observe the general safety and
accident prevention regulations.
2. Always comply with local traffic regulations
when driving on public roads!
3. Clothing worn by the fitter must be close-fitting.
Avoid wearing loose jackets and shirts.
4. Prevent fires by keeping the machine clean!
Leaving the round baler
1. Repair, service and cleaning work and the
elimination of malfunctions should only be
performed with the drive and the tractor engine
switched off – remove the ignition key!
2. Escaping fluid (fuel or hydraulic oil) under high
pressure can penetrate the skin and cause
serious injury. In such a case, consult a doctor
immediately as otherwise serious infections
may result!