Claas MEDION 310, Руководство по ремонту

Страница: 41 / 51

299 216.0 - RHB MEDION 340 - 310
2.1.3
Cab
Unscrew four hex. bolts each from the lateral wind-
screen frames on the left and right side.
(Fig. 9)
Unscrew three hex. bolts (O) from the bottom wind-
screen frame.
Unscrew brackets (P) on the left and right side.
Remove the windscreen completely with the wind-
screen frame, using a suitable suction device if
necessary.
Important!
The windscreen frame is installed using sealing
compound all around. The sealing compound
must be cut out step-by-step with a sharp knife
when removing the windscreen.
Danger!
The windscreen must not be excessively
pressed or pulled while removing it as it will
otherwise suffer stress and may be
destroyed.
Wear gloves during the entire removal
process.
(Fig. 10, 11)
9
O
10
P
11