Claas LEXION 570 Montana, Руководство оператора

Страница: 37 / 41

0299 767.0 - BA LEXION 570 Montana
4.1.9
Safety Rules
Relieving the radial spreader accumulator
Relieve the oil pressure from accumulators (D).
This is done as follows:
Start the engine and switch on master safety switch.
Swing the radial spreader from the chopper position to
the centre position between chopper and swathing
position by pressing pushbutton (1).
Stop the engine.
Now carefully loosen the hose of the hydraulic cylinder
at (A).
DANGER!
Residual oil pressure may still exist in the
lines.
☞
Wear safety goggles.
☞
Wear safety gloves.
☞
Wrap a thick rag around the union nut.
☞
Slacken off the union nut by a quarter turn
and slightly tilt the line until the oil has
escaped.
ENVIRONMENT!
Dispose of oil properly.
(Fig. 13, 14)
1
13
A
D
D
14