Claas LEXION 570 Montana, Руководство оператора

Страница: 21 / 41

0299 767.0 - BA LEXION 570 Montana
3.2.1
General information
IMPORTANT NOTICE The instructions contained in this manual
should be carefully read and observed by all
persons involved with the operation, mainte-
nance and inspection of this machine in order
to prevent accidents. In particular, read the
section “Safety rules”.
The use of spare parts, accessories and
ancillary equipment other than genuine CLAAS
products or those which have been tested and
approved by CLAAS, may change the specified
design characteristics of this CLAAS machine
or detract from its functional performance, with
a possible adverse effect on the active and/or
passive operational safety of the machine and
its occupational safety standards (accident
prevention).
CLAAS is in no way liable for any damage or
personal injury caused through the use of
other than original or approved CLAAS parts,
accessories and ancillary equipment.
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes subsequently as
technical developments continue. Respon-
sibility for errors or omissions not accepted.
Front, rear, right and left refer to the direction
of forward travel.
General information