Model XP2F
Installation, Operation, and Maintenance Manual
N-XP2F IOM V1.0-4.5
Page 9 of 35
4.1.3
Installing Wire Cable Glands
Included with the X35 are multiple 3-hole, 2-hole, and blank glands. These will need to be selected and installed
based on the number of wires coming and going from the X35 housing. To ensure IP68 rating, please match the
number of holes to the number of wires. Examples can be seen in
WARNING:
DO NOT leave any holes/glands open. Blanks can be used to block an entire port or if a custom sized
hole needs to be drilled.
Figure 4.5 – 4 wire config (1x 2hole, 1x drilled blank), 3 wire config (1x 3hole), 3 wire config (1x 2hole), 6 wire (1x 2hole, 1x 3hole)
