GET LISTENING
GET CONNECTED
3-2 PREPARE YOUR SPEAKER
FOR PAIRING
1.Press and hold the POWER switch for at least 3 seconds.
2. Wait for the LED LIGHT to flash BLUE.
You will hear a prompt indicating it is ready to pair.
3-3 PREPARE YOUR PHONE OR DEVICE
Turn on Bluetooth.
ON AN IPHONE®, IPOD®, OR IPAD®
Go to SETTINGS > GENERAL > and enable BLUETOOTH
ON ANDROID®,
Go to SETTINGS >CONNECTIONS> and enable BLUETOOTH
ON A BLACKBERRY®
Go to SETTINGS/OPTIONS >BLUETOOTH and enable
BLUETOOTH
3-4 MAKE THE CONNECTION
Go to your device’s Bluetooth settings.
ADD, SEARCH or SCAN FOR DEVICES
When “NAKAMICHI BTSP10” appears, select it.
IF ASKED FOR A PASSCODE
Enter “0000”
When pairing is successful, you will hear a tone and the LED
LIGHT will turn BLUE.
This is a one-time event per device. To pair your NAKAMICHI
Speaker to another device, repeat steps 3.2 to 3.4.
3-5 PLUG & PLAY
No Bluetooth? Connect via 3.5mm Aux input.
Connect the 3.5mm Aux-in cable to the device and the LED
LIGHT will turn GREEN.
Play audio from any device with a 3.5mm audio jack or audio
output.
When BC161 Speaker connects, via 3.5mm
stereo input mode, the speaker’s control panel functions such as
MUSIC PLAY/ PAUSE and TRACK CONTROLS will not work.
These functions can only be controlled from your audio source.
7
8
4-1 GET THE BEST SOUND
For best listening results, make sure your BC161 Speaker is
resting on its base and speaker grill facing upwards. Peel off the
protective film from its base before use.
When connected wirelessly via Bluetooth, it’s best to maximize the
volume on your phone/device and to control volume use the
speaker.
When connected via 3.5mm stereo input, your phone/device may
distort the audio signal if turned up too loud.
4-2 CONNECTION PRIORITY
Incoming and outgoing calls will always take precedence over
audio playback when connected via Bluetooth. Audio content via
3.5mm stereo input will override wireless audio via Bluetooth.
Содержание BC161
Страница 1: ...BC161 BLUE TOOTH SPEAKER TM User Manual...
