To warm as usual.
3.
Run unit in a well ventilated area until tank is empty.
4. Replace
nozzle.
Cleaning is now complete. Unplug and refill with a quality water based fog fluid once cool. All foggers are prone
To clogging due to the consistency of fog fluid and the high temperatures at which it vaporizes. However a well
Maintained machine should provide years of reliable use. The body of the unit may be cleaned with a dry cloth.
Store dry.
Replacing Fuses
In the event that the unit does not function when plugged in, then it is likely that the fuse has blown.
Unplug unit before attempting to replace the fuse.
In order to replace the fuse, unscrew the ‘Fuse holder Cap’ to reveal the fuse. The unit has a label attached
Which indicates the correct fuse rating or you may refer to the Technical Specifications section in this guide. It is
Most important that replacement fuses are of the correct rating.
Failure to use the correct fuse could damage the unit beyond economic repair
The fuse should simply be placed inside the holder and the screw cap replaced.
Maintenance & Servicing
Do not allow fluid to become contaminated. Work on internal parts should be carried out by a qualified
Technician. Removal of any covers is considered a breach of warranty and will not be covered under any such
Agreement unless authorized
Troubleshooting
If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the external
Fuse remote connection and main power supply. If all appear to be OK, plug the unit in again. If fog does not
Come out after holding the remote control button for 30 seconds, check the hose attached to the tank to make
Sure there is fluid going through the hose. If you are unable to determine the cause of the problem, do not simply
Continue to push the remote control button as this may damage the unit. Contact manufacturer or your dealer for
Servicing.
