3
/
8
Note:
1. The monitors take around 20 seconds to display at first set-up, later on it only
takes around 2-3 seconds to display upon switching.
2. Most computers especially laptops do not have 3 or 4 HDMI graphic outputs, thus
reliable adapters will be needed for DVI, VGA, DisplayPort or USB C. For laptop that
only has one HDMI, a docking station will be needed (Dell Docking is
preferred).Please reach out to support for reference if needed.
IV.
Display Mode Settings
Take win7 as an example: hold down the keyboard w P, as
shown in the figure
, a dialog will pop up as below.
Select Duplicate or Extend, then the two monitors can be displayed at the same time
per selected display mode.
V.
Switch Modes
：
Button Switch
：
Switch to any port by buttons on front panel.
Click mouse Switch :
Triple Monitor Model: Double click the mouse middle roller for circular switching
