CK Light 192CH DMX CONTROLLER II, Руководство пользователя

Страница: 15 / 16

1) Press the Auto/Del button to enter into Auto mode. The Auto LED will light
indicating the Auto mode is active.
2) Use the bank Up/Down button to select a bank of scenes to run.
3) After selecting the bank of scenes to run, you can use the speed slider and Fade Time
slider to adjust the speed of the scene progression.
4) You can use the Tap Sync/Display button to set the speed instead. The amount of time
between the last two taps will instruct the controller in the length of time between
steps. This setting will stay in effect until the speed slider is moved.
5) Press the Auto/Display button to exit Auto mode.
�
�
� �
Music
Music Music
Music Mode
Mode Mode
Mode
1) Press the Music/Bank Copy button to activate Music mode.
2) Use the bank Up/Down button to select a bank of scenes you wish to run. The scenes
selected will run through sequentially to the beat of the music identified by the
built-in microphone.
3) Tap the Music/Bank Copy button again to exit music mode.
� � � �
Running Running Running Running Chases Chases Chases Chases
�
�
� �
Manual
Manual Manual
Manual Mode
Mode Mode
Mode
1) When the power is turned on, the unit enters manual mode automatically.
2) Select the chase you wish to run by pressing the corresponding chase button. Pressing
this button a second time will unselect the chase.
� � � �
Auto Auto Auto Auto Mode Mode Mode Mode
1) Press the Auto/Del button to activate Auto mode.
2) Select the desired by pressing one of six Chase buttons. Pressing this button a second
time will negate this selection.
3) Use the speed slider and Fand time slider to adjust the chase to your specifications.
� � � �
Music Music Music Music Mode Mode Mode Mode
1) Press the Music/Bank Copy button to activate Music mode.
2) Select the desired chase by pressing one of six Chase buttons, this will activate the
chase and cause it to respond to the rhythms of the music.