4. Connect the unit to main supply. The heater is ready for use
5. When used for the first time, the heater might emit an odor and smoke a little. This is normal and
quite harmless, the smoke and smell will disappear as soon as the factory coating on the heating
element has burnt off.
THERMOSTAT FUNCTION&ADJUSTMENT
There is thermostat installed in this unti,it switches the unit ON and OFF according to the set
temperature,when the temperature falls below the set temperature the unit switches ON and vice
versa.
1. Adjust the thermostat clockwise to start the unit and warm up the room to desired
temperature.
2. When desired temperature reached, turn the knob anti-clockwise carefully until a “click”
sound is heard. The thermostat will now keep the room at a constant temperature.
OVERHEAT PROTECTION
The unit is equipped with an overheat protection to prevent fire hazards as well as to safeguard the
product.the heater will be shut down automatically when it becomes overheated.Let it cool down ,the
cut-off protection will resume to its normal position automatically
and the unit is ready to work again
4.
Cleaning and maintenance
Before cleaning the appliance, disconnect it from the socket and let it cool down.
The enclosure is easily to get dirty, wipe it often with soft sponge. For very dirty parts, wipe with a
sponge dipped in < 50
℃
water and mild detergent, then dry the heater enclosure with clean cloth. Be
careful not to let the water enter the appliance inner.
Don’t splash water onto the heater
，
never use solvent like gasoline, isoamyl acetate, toluene etc to
clean the heater, in order to protect the enclosure.
Clean the coupler, dry and pack it in a plastic bag.
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in the
packing box and store it in a dry, ventilated place.
