To charge your vehicle:
1.
Ensure that the charge point is ready and available for changing. This is indicated by
a GREEN system check LED.
2.
Connect the EV to using the appropriate cable to the type 2 EV connection socket
located on the front of the unit.
3.
Place your user ID key fob over the key fob zone indicated on the front of the unit.
or
Authorise charging by using app if appropriate.
Or
If the EV LED is periodically flashing green (every 4 seconds)
authorisation/payment is not required
4.
If authorisation is successful, the EV LED will flash GREEN every 4 seconds.
5.
Charging will start automatically and is indicated by a pulsing
ORANGE EV LED.
Note: when charging starts, the charge cable will be locked into position.
6.
When the EV has been fully charged, the charge status (EV) LED
will turn GREEN.
7.
To stop charging and release the cable connector lock unplug the cable at the EV
end.
or
Place your user ID key fob over the key fob zone indicated
on the front of the unit.
or
Use the stop charge function in the app.
8.
Remove the charging cable from the type 2 socket.
Cityline 100 IDC User Operation