39
EN
1. To turn the product on, press and hold the power on/off button for 2 seconds.
Up button
Down button
Power on/off button
Change mode button
2. Press the change mode button to toggle between different operating modes
(VOL, DIS, ODO, RPM and TIME). The corresponding mode icon is show on
the display.
3. Press the up/down button to select the speed gear. The different gears with
their corresponding speeds are listed in the table below:
Speed gear
Speed range
1
0 - 6 km/h
2
7 - 15 km/h
3
16 - 24 km/h
4. Fold the kickstand.
5. Place one foot on deck grip the other foot on the ground to balance better and
gently press the accelerator to start riding. Once the balance is achieved, it
is safe to put the other foot on the deck too. The more the user presses the
accelerator, the faster is the speed.
6. Release the accelerator and gently press the electric brake to stop the
product. Gradually get down, putting one foot down at a time.
7. Turn off the product when the ride is over by holding and pressing the on/off
button for about 2 seconds.
WARNING
Do not ride while holding the product with just one hand. Do not
attempt any stunts or tricks while riding.
The product has both electric brake in the front and foot brake at the
rear. Always use the electric brake to stop. The foot brake should be
used only if the electric brake does not work properly.
CB0049-BigTrend-IM-INT-V1.2.indb 39
20/12/2018 10:56 AM
