background image


 
 
 
 

Radio Compliance Information 

 
5792 SHoW DMX Neo Radio Transceiver 
FCC ID:  VU65792 
IC ID: 

 

7480A5792 

    
FCC Part 15 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 
measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and receiver. 
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
• Consult the dealer or an experienced radio/TV technician for help. 
 
Radio Frequency Notifications 
 
FCC Notifications

 

RF Radiation 

The Product is an intentional radiator of Radio Frequency (RF) energy. In order to limit RF exposure to 

personnel in the immediate area, the Product should be located and installed such that a separation of at least 20 
centimeters is maintained between the Product’s antenna and personnel in the vicinity of the device. 
 
Modification Warning 
Caution: changes or modifications to this equipment, not expressly approved by City Theatrical Inc. could void the 
user’s authority to operate the equipment. 
 
Industry Canada Notifications 
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this device must accept any interference, including interference 
that may cause undesired operation of the device. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 
Product Installation and Configuration Guide © City Theatrical Inc. 2007 
 
5792 Approved Antenna 
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the 
equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. 
This device has been designed to operate with the antennas listed below. Antennas not included in this list or having 
a gain greater than 5 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.

 

Antennas    

The model: 5792 can be configured with any one of the approved antennas listed below for fixed, point-
to-point one server and one client configuration. When the model: 5792 is configured for point-to-
multipoint one server and multiple clients configuration (clients talk to server only one at a time), clients 
can use any of the approved antennas listed below and the server can use any of the approved antennas 
listed below, with the exception of the 14dBi antenna. 
 
5792 FCC/IC Approved Antennas: 
 

Manufacturer Model 

Type 

Connector 

Gain 

Nearson 

S151AH-2450S 

Omni whip 

SMA plug reverse polarity 

5dBi 

Nearson 

S141AH-2450 

Omni whip 

SMA plug reverse polarity 

2dBi 

Содержание SHoW DMX Neo 5701








































































Отзывы: