Page 23 of 29
Appendix B: Compliance Information
System Compliance Information
The City Theatrical 6500M PDS-750 TRX is CE Certified
Standards Applied:
EN 55103-1, EN55103-2
EN 60950-1:2006
Product Conforms to CE Marking Directive 93/68/EEC
The City Theatrical 6500M PDS-750 TRX is RoHS compliant
The City Theatrical 6500 PDS-750 TRX is ETL and cETL Listed and conforms to UL STD 508A
and is certified to CAN/CSA STD C22.2 NO. 14-95
About the SHoW DMX Radios installed:
The City Theatrical 6500M PDS-750 TRX is equipped with a CE compliant City Theatrical
5792M SHoW DMX Radio which is FCC and IC Certified for use in the US and Canada and is
CE Certified for use in Europe
Radio Compliance Information
5792M SHoW DMX
Neo™ Radio Module
FCC ID:
VU65792M
IC:
7480A-5792M
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Radio Frequency Notifications
FCC Notifications
RF Radiation
The Product is an intentional radiator of Radio Frequency (RF) energy. In order to limit RF
exposure to personnel in the immediate area, the Product should be located and installed such that a
separation of at least 20 centimeters is maintained between the Product’s antenna and personnel in the
vicinity of the device.
