LOW BATTERY WARNING
Repeated beeping during opening indicates that the battery is low
and needs replacing.
CHANGING THE BATTERY
Note: Only use 9V Duracell Alkaline batteries.
3715 Keypad
Steps to change battery of 3715 keypad
1. Slide the keypad housing up and carefully pull away from mounting
surface, exposing battery compartment.
2. Remove battery and replace with new one. The connector is
easily removed by unsnapping it from the two terminals on the top
of the battery.
3. CAUTION: Hold onto battery terminal to avoid pulling wires out of
housing.
4. Once battery is replaced, carefully position the keypad over the
mounting screws and slid the keypad housing down. Ensure that
there are no wires or cables trapped between the input pad and
the safe door. Pinched cables can result in lock failure.
For further instructions on adding and deleting users please
contact us.
City Safes: Ph: 1300 360 127
or email:
