ci5000 Series Printer Operation Guide
Draft Version 0.1
2-7
The following controls are used to calibrate, test and set Printer specific settings and
configurations. These controls should only be changed by a Citronix trained service engineer.
1.
Service
2.
Flush Prime
3.
Override
4.
Test Valves
5.
Run Pump
6.
HV Trip
7.
Advance Service
(5)
Properties:
The properties page is used during installation to set up the printer for a particular application. It is
used for setting up the accessories such as photocells, encoders and beacons.
(6)
Security:
The security page allows certain features of the printer to be disabled until a user with the correct
privileges logs in. By default Security is disabled. To enable security you must have at least one
user with security privileges.
