Citronic SMFX-200, Инструкция по эксплуатации

Страница: 6 / 11

14. Level meter - The dual LED's
indicators are used to detail either the
master output level, a combination of the
master output level or the PGM monaural
level.
15. Effect select knobs - Used to select
the type of effect mix desired, 3 functions
(Echo, Zip and Roll) can be choosed.
16. Effects cue - Used to select the beat
effects to be monitored with headphones.
17. Effects mode switch - Used to select
the desired crossover effect mode.
• Fader : In this mode you can use the
crossfader to control the crossover
effects and perform start/stop (recue)
functions.
• Off : Crossover effects are disabled.
• Auto : In this mode you don’t have to
use the crossfader : simply push one of
the buttons and the mix will be done
automatically in full beat sync!
18. TAP/BPM button - Tap this button to
switch TAP/BPM function.
19. Effect beat selector buttons - To
select different beat (also change the
time parameter) accoding to the
measured BPM of the effector.
20. Depth feedback (parameter Y) - Used
to adjust the value of the parameter Y
(mix ratio or resonance or feedback) of
the effector.
21. Time array (parameter X) - Used to
adjust the value of the parameter X (time)
of the effector.
22. Effects selector - Used to select
desired effects.
23. Input selector - Used to select the
source to be effected.
24. Effects indicator - When any of the
effects are in use, these indicators will
grow to match any of the effects that may
be functioning.
25. Depth feedback display - The depth
feedback digital display will indicate the
parameter ratio percentage.
26. Time array display - This display will
signify the pitch percentage speed. Any
adjustments will be based on this default
setting.
27. BPM display - This meter will display
the source BPMs to be effected.