Citronic ru210 Скачать руководство пользователя страница 6

 

171.970UK, 171.971UK User Manual 

Specifications 

 

Power supply 

12-18Vdc 500mA adaptor (supplied) 

Batteries 

4 x AA (included) 

Carrier frequency 

863.00 to 865.00MHz  

Channels 

81 tuneable UHF frequencies 

Tuning method 

Phase-locked loop 

S/N  ratio 

>105dB 

THD 

<0.5% @ 1KHz 

Frequency response 

50Hz - 18kHz (±1dB) 

Image rejection 

85dB  typical 

Range 

60m (max) 

Output impedance 

2.2k ohms 

Output level 

Balanced: 0-400mv, unbalanced: 0-200mv 

Connectors 

DC in, 2 x XLRM, 6.3mm jack, 2 x BNC antenna 

Dimensions - handheld transmitter 

265 x 49mmØ 

Dimensions - bodypack transmitter 

110 x 67 x 24mm 

Dimensions - receiver 

409 x 190 x 44mm 

Weight - handheld transmitter 

330g (no battery) 

Weight - bodypack transmitter 

75g (no battery) 

Weight - receiver 

1.37kg 

 

Troubleshooting 

 

“POWER” LED does not 

light on receiver 

Ensure power adapter is connected to mains and working properly 
Ensure receiver is switched on 

“POWER” LED is lit but 

no “RF” or “AF” LEDs 

Ensure transmitter is switched on 
Check that transmitter is not out of reception range 
Check that transmitter batteries are good / charged 
Ensure that genuine Citronic RU series transmitters are being used. 
Ensure transmitter and receiver frequencies are synced (see “Tuning”) 

“POWER” and “RF” LEDs 

are lit but no “AF”  and 

no sound 

Check that transmitter switch is not in “MUTE” position 
Ensure transmitter has good / charged batteries 
Ensure there is no other nearby transmitter with the same frequency 

All LEDs lit but no sound 

from mic 

Make sure receiver is properly connected to amplifier/mixer 
Ensure that receiver and amplifier/mixer channel volumes are turned up 

Microphone output is 

very loud or distorted 

Turn down VOLUME on receiver 
Reduce Gain on mixer / amplifier 
Ensure that the XLR output is not fed to a line input 

Microphone output is 

very low 

Turn up VOLUME on receiver 
Increase gain on the mixer or amplifier 
Ensure that the jack output is not fed to a low Z input 
Check transmitter batteries 

 
 

 

1622

 

 

Disposal:

 The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or  

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.  

The goods must be disposed of according to your local council guidelines. 

 

Errors and omissions excepted. 

 

Copyright© 2016. AVSL Group Ltd. 

Отзывы: