Front and Rear Connections
1.
DISC TRAY
–
This tray is used to load and unload a compact disc into the drive mechanism.
The tray is opened and closed by pressing the OPEN/CLOSE BUTTON. Never attempt to
force the disc tray open or close when the power is turned off.
2.
OPEN/CLOSE (Transport Tray Open / Close)
– This button is used to open and close
the disc tray. NOTE: When a disc is loaded, the tray will not open unless the unit is in
PAUSE or CUE mode.
3.
USB PORT 1 (FRONT) –
This is the USB port where you insert your USB mass storage
device for playing MP3 files.
4.
POWER SWITCH -
This switch is used to control the unit's main power. An LED directly
above the power switch will glow to indicate main power is on.
5.
POWER CONNECTOR
- This is the main power connection. Only use the supplied power
cord. Use of any other power may result in severe damages to the unit.
6.
USB PORT 2 (REAR) –
This is the second USB port where you insert your USB mass
storage device for playing MP3 files.
7.
CONTROL CONNECTOR -
Connect this connector to the control unit using the supplied
mini-DIN8 cable.
8.
AUDIO OUT R & L -
These jacks send a left and right analog mono output signal. Use these
jacks to send standard audio to a mixer or receiver. The red colored jack represents the right
channel output and white jack represents the left channels output.
All manuals and user guides at all-guides.com