Monolith-500 User Manual
Operation
With volume controls (7, 9) turned fully down, switch on the power (14)
Turn up the Full Range Volume control part way with audio playing into the subwoofer and
check the column speaker for output.
Increase the Volume setting to the required level and then gradually increase the Subwoofer
Volume level to introduce the correct balance of sub frequencies.
Adjust the subwoofer crossover as desired, noting that lower frequency settings may need to
be compensated with higher Subwoofer Volume settings.
Ensure that volume controls are turned down before powering down and unplug from the
mains when not in use for long periods.
Specifications
Power supply
230Vac, 50Hz (IEC)
Output power : rms
400W sub + 100W mid/top
Sub driver
300mmØ (12“), 65mm (2.5“) voice coil
Mid driver
6 x 75mmØ (3“)
Voice coil
65mmØ (2.5“) sub, 25mmØ (1“) mid
Magnet
1.75kg (50oz) sub, 170g (6oz) mid
HF driver
2 x 25mmØ (1“) neodymium silk dome
Impedance
8 Ohm (each driver)
Inputs
XLR, 3.5mm jack, L+R RCA, Bluetooth receiver
Outputs
Speakon to satellite, XLR signal thru
Frequency response
40-120Hz (sub), 120Hz - 20kHz (column)
Max. SPL @ 1W/1m
120dB (sub), 118dB (column)
Dimensions : mid-top cabinet
730 x 140 x 115mm
Weight : mid-top cabinet
5.35kg
Dimensions : sub cabinet
498 x 460 x 345mm
Weight : sub cabinet
19.21kg
Dimensions (assembled)
1935 x 460 x 345mm
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product i
s classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2017. AVSL Group Ltd.
