CITROËN C Zero, Руководство пользователя

Страница: 95 / 136

8
93
In the event of a breakdown
Take care, this product is harmful if
swallowed and causes irritation to the
eyes.
Keep this product out of the reach of
children.
The use-by date is marked on the bottle.
After use, do not discard the bottle by the
roadside, take it to a CITROËN dealer or
an authorised waste disposal site.
Do not forget to obtain a new sealant
bottle, available from a CITROËN dealer
or a qualified workshop.
Inflation
F
Check that switch A of the compressor is in
the "OFF" position.
F
Uncoil the compressor hose B fully.
F
Connect the hose to the sealed tyre's valve.
F
Connect the compressor's electrical
connector to the vehicle's 12V socket
(ignition switch in "ON" or "ACC" position).
F
Switch on the compressor by setting
switch A in the "ON" position.
F
Adjust the pressure using the compressor in
accordance with the vehicle's tyre pressure
label located on the driver's door aperture.
A significant loss of pressure indicates that
the puncture has not been fully sealed;
contact a CITROËN dealer or qualified
workshop for your vehicle to be repaired.
F
Remove the compressor and stow the kit.
F
Drive immediately at reduced speed
(50 mph (80 km/h) max) limiting the
distance travelled to approximately
120 miles (200 km).
If after approximately five to seven
minutes, the required pressure is not
reached, this indicates that the tyre is not
repairable; contact a CITROËN dealer or
a qualified workshop for your vehicle to be
recovered.
F
Remove the injection hose.
F
Replace the valve core using the tool.
As soon as possible, go to a CITROËN
dealer or a qualified workshop.
You must inform the technician that you
have used this kit. After inspection, the
technician will let you know if the tyre can
be repaired or if it must be replaced.
Spare wheel
Scan the QR code on page 3 to view
explanatory videos.
Parking the vehicle
Park the vehicle where it does not block
traffic: the ground must be level, stable
and non-slippery.
Apply the parking brake, switch off the
ignition and put the drive selector in
position P in order to block the wheels.
If necessary, place a chock under the
wheel diagonally opposite to the wheel to
be changed.
Make absolutely certain that all the
occupants have left the vehicle and are
waiting in a safe area.
Never go underneath a vehicle raised
using a jack; use an axle stand.
https://www.automotive-manuals.net/