© 1999-2017 Citrix Systems, Inc. All rights reserved.
p.15
https://docs.citrix.com
Install and Setup
Jul 15, 2013
When you receive your MPX appliance, you unpack the appliance and prepare the site and rack. After you determine that
the location where you will install your appliance meets the environmental standards and the server rack is in place
according to the instructions, you install the hardware. After you mount the appliance, you connect it to the network, to a
power source, and to the console terminal that you use for the initial configuration of NetScaler Gateway. After you turn
on the appliance, you perform the initial configuration, and assign management and network IP addresses. Be sure to
observe the cautions and warnings listed with the installation instructions.
